VV Cep emission line near 6540 Å ?

VV Cep 2017-2019 Campaign
Moderator for this forum: Ernst Pollmann
Post Reply
Olivier GARDE
Posts: 1243
Joined: Thu Sep 29, 2011 6:35 am
Location: Rhône Alpes FRANCE
Contact:

VV Cep emission line near 6540 Å ?

Post by Olivier GARDE »

Just to check if it's a hot pixel or a real emission line : do you know if this line is real or not ?

Image

Are there any other people who did VV Cep about the same date ?
LHIRES III #5, LISA, e-Shel, C14, RC400 Astrosib, AP1600
http://o.garde.free.fr/astro/Spectro1/Bienvenue.html
Andrew Smith
Posts: 321
Joined: Fri Sep 30, 2011 12:23 pm

Re: VV Cep emission line near 6540 Å ?

Post by Andrew Smith »

Oliver, it seems to show in Etienne's spectra posted on 25th, see his post .

Regards Andrew
etienne bertrand
Posts: 1040
Joined: Mon Aug 31, 2015 11:26 am

Re: VV Cep emission line near 6540 Å ?

Post by etienne bertrand »

Salut Olivier,

La raie d'émission sur ton spectre est pile à 6540A ?
Sur mes spectres elle y est à 6540.61A et à 6539.95A c'est la raie d'absorption qui s'y trouve.
Cette raie est présente sur des spectres de Décembre.
Image
Jack Martin
Posts: 54
Joined: Fri Sep 11, 2015 10:31 am

Re: VV Cep emission line near 6540 Å ?

Post by Jack Martin »

vv cep.png
vv cep.png (43.84 KiB) Viewed 6253 times
Gentlemen,

YES observation confirmed.

Can someone explain the astrophysics of what's going on here ?

Regards,

Jack

Essex UK
James Foster
Posts: 439
Joined: Sun Jan 24, 2016 7:14 am

Re: VV Cep emission line near 6540 Å ?

Post by James Foster »

I have this feature on my last LhiresIII H-Alpha spectrum taken on 29Dec17:
Image

I labeled this emission near 6540A, via BaSS Project V1.98, with nearest element "praseodymium." I doubt is the actual emission line in question; atomic number
59 (cerium ← praseodymium → neodymium)!

There was an article discussing heavy metal abundances (including this element) in the atmosphere of Aldebaran seen here:
http://adsbit.harvard.edu//full/1990SvA ... 0.000.html

James
James Foster
eShel2-Zwo ASI6200MM Pro
Lhires III (2400/1800/600 ln/mm Grat) Spectroscope
LISA IR/Visual Spectroscope (IR Configured)
Alpy 200/600 with Guide/Calibration modules and Photometric slit
Star Analyzer 200
Phil Bennett
Posts: 10
Joined: Mon Aug 24, 2015 7:40 am

Re: VV Cep emission line near 6540 Å ?

Post by Phil Bennett »

My guess would be Fe II] 6541.3569.

Fe is abundant, and mostly present as Fe II (Fe+). The upper level of this line is at 102824 cm^-1, which is nearly coincident with the upper level of Lyman-gamma at 972.5368 A. In this situation, Lyman-gamma could pump the upper level of this Fe II line, giving rise to an emission feature.

This is just a guess -- I'm not aware of this line being seen elsewhere.

Phil
Peter Somogyi
Posts: 420
Joined: Sun Jul 13, 2014 8:56 am

Re: VV Cep emission line near 6540 Å ?

Post by Peter Somogyi »

I've made an experiment on 2017.08.20 with the 15 micron slit, including a mu. Cep - that also have a peak at there:
vvcep_6540A_feature.png
vvcep_6540A_feature.png (47.17 KiB) Viewed 6086 times
Heliocentrically uncorrected all for now, I've shifted mu. Cep using ISIS->Misc->Radial velocity tool to align the actual VV Cep here.
The ratio difference is below noise I think (above 1 hour exposure for VV Cep that time, mu. Cep is only 3 minute but also noiseless, say SNR > 100), or it may also come from the fact that B component was not subtracted for now, as I neglected that small elevation when B was still up.
The narrow peaks on the ratio unfortunately all correlate with tellurics places (and their tiny shift when aligning both stars), so no real difference.

Of course, any real change is still possible since 2017 aug, I just wanted to point out here that feature is also existing on mu Cep.
To show and quantitize weak differences, I recommend subtracting a properly aligned mu. Cep (attaching here my example: R~26000 - you need to shift it and decrease resolution for your spectrum), or someone need to get an alpha Ori.
mucep_sh.zip
(13.49 KiB) Downloaded 408 times
Subtracting mu cep also reveals noise level (including continuum reproduceability errors), making it out easy e.g. whether it falls under such an error level (e.g. resolution change) or this was a real change.
All the shift, B comp. elevation (should affect small, or none today - see BAV Umag curve whether needed), subtraction are easy to do in ISIS for anyone, who feels there was such a change to present it.

Cheers,
Peter
Post Reply