UVEX3 N2

James Foster
Posts: 439
Joined: Sun Jan 24, 2016 7:14 am

Re: UVEX3 N2

Post by James Foster »

To: Tom,

Thanks for the reply. I might stay with the 3D print machine since the cost is relatively low and it may have other uses besides the UVEX3 project.
I only picked the Filament type of Carbon Fiber PetG because it was being used by the Christian and the others with finished spectroscopes.
Also keep in mind, if your not in a hurry, that Shelyak might sell the main body as a metal unit in the near future; 3months to 1 year from now?

James
James Foster
eShel2-Zwo ASI6200MM Pro
Lhires III (2400/1800/600 ln/mm Grat) Spectroscope
LISA IR/Visual Spectroscope (IR Configured)
Alpy 200/600 with Guide/Calibration modules and Photometric slit
Star Analyzer 200
Stephane Charbonnel
Posts: 70
Joined: Thu Sep 29, 2011 10:20 pm
Location: FR, 49 ou 44

Re: UVEX3 N2

Post by Stephane Charbonnel »

James,

Be carreful filament with carbon is less easy to print than without.
The printer must be closed because the temperature to use it must be high (minimum 280°C of memory) and printer noozles must be higher than 0.6 mm because can clog easily. So be carrefull with 3D cheap printer ...

Stephane
Tom Love
Posts: 64
Joined: Sun Apr 21, 2019 5:57 am

Re: UVEX3 N2

Post by Tom Love »

I've just received my printed UVEX parts from a commercial 3D printing and fabrication house (using laser sintering in nylon PA12, which has much better properties than more common nylon 6). It's not a cheap method, but the parts are very, very rigid, with a nice smooth finish. I have difficulty believing that metal parts with realistic dimensions would be very much more rigid. I won't have much time this weekend, so it probably won't be until the following week, but the next task will be to test IR opacity, and then to assemble the optics.

It would be very useful to have a schedule of the specific metal parts (unless I've missed it somewhere) - I can kind of figure them out from the pictures and instructions, but I'm guessing at some of the lengths needed for the hex bolts etc.
-------------------------------------------------
Martinborough, New Zealand. Alpy, Lhires RC12
James Foster
Posts: 439
Joined: Sun Jan 24, 2016 7:14 am

Re: UVEX3 N2

Post by James Foster »

I wonder if any of these more "specialty" florescent bulbs (made for special UV requirement for raising desert reptiles) would be good for the UVEX3?:
http://www.exo-terra.com/download/sales ... _NA-EU.pdf

James
James Foster
eShel2-Zwo ASI6200MM Pro
Lhires III (2400/1800/600 ln/mm Grat) Spectroscope
LISA IR/Visual Spectroscope (IR Configured)
Alpy 200/600 with Guide/Calibration modules and Photometric slit
Star Analyzer 200
Christian Buil
Posts: 1431
Joined: Mon Sep 26, 2011 6:59 pm
Contact:

Re: UVEX3 N2

Post by Christian Buil »

James,

I did not know that this type of lamp existed. It's quite extraordinary!!!

I have the impression that the glass of the lamp is quartz and thus lets pass the UV. This might be ideal for UVEX ...
Someone needs to buy and verify that the mercury UV lines are present (+ fluorescent band)

But be CAREFUL, these lamps are surely dangerous for human eyes. We must not look at them directly.

Christian
James Foster
Posts: 439
Joined: Sun Jan 24, 2016 7:14 am

Re: UVEX3 N2

Post by James Foster »

To: Christian,

RE:"I did not know that this type of lamp existed. It's quite extraordinary!!!"

Yes I thought the UVEX3 team might benefit from this relatively "cheap" UV source.
I opted to purchase the Exo Terra Repti-Glo 10.0 Compact Fluorescent Desert Terrarium Lamp, 13-Watt ($10 USD) and
the Zoo Med 25156 Reptisun 5.0 Uvb Compact 13W Fluorescent Lamp, Mini ($12 USD). Here are their respective links:

https://www.amazon.com/gp/product/B0010 ... UTF8&psc=1
https://www.amazon.com/gp/product/B00A8 ... UTF8&psc=1

I may tune the LhiresIII to UV to test these UV sources out before my UVEX3 is made; at least I can go to 3650A?
I'm going to purchase the UVEX optics from Thorlabs this week and decide what route to go (get a company to print the UVEX or
get a 3D printed and do it myself) before the end of July19. Cheers!

Sincerely

James
James Foster
eShel2-Zwo ASI6200MM Pro
Lhires III (2400/1800/600 ln/mm Grat) Spectroscope
LISA IR/Visual Spectroscope (IR Configured)
Alpy 200/600 with Guide/Calibration modules and Photometric slit
Star Analyzer 200
Terry Bohlsen
Posts: 191
Joined: Thu Sep 29, 2011 7:40 am

Re: UVEX3 N2

Post by Terry Bohlsen »

Hi all
I am thinking about making one of these spectrographs. I have made a LOSPEC that works very well. I have a LISA so don't really need another low res spectrograph but I think the idea is fun anyway and it would probably compliment the LISA in the blue end of the spectrum.
What is holding me back is the guide module. It is very expensive to buy a Alpy guide module. Christian's page mentions a 3D printed option. Has this been designed yet?
Cheers
Terry
Terry Bohlsen
Armidale NSW
Australia
Robin Leadbeater
Posts: 1926
Joined: Mon Sep 26, 2011 4:41 pm
Contact:

Re: UVEX3 N2

Post by Robin Leadbeater »

Hi Terry,

There are details of the "Calibrex" calibration lamp and guider module on the UVEX website, but I did not see the printing files for the box there
http://uvex30.000webhostapp.com/calibrex-par-lopex/

Cheers
Robin
LHIRES III #29 ATIK314 ALPY 600/200 ATIK428 Star Analyser 100/200 C11 EQ6
http://www.threehillsobservatory.co.uk
Dubreuil Pierre
Posts: 202
Joined: Sat Oct 01, 2011 12:34 pm

Re: UVEX3 N2

Post by Dubreuil Pierre »

Hello Terry and Robin

The guiding and calibration module is being tested on the sky.
see post http://www.spectro-aras.com/forum/viewt ... =45&t=2363

Sunday at the OHP Stephane UBAUD who made the first prototype will be present and will be able to present it to you.
A UVEX spectrograph (3) with this module will be available for testing.

good to you

Pierre
Terry Bohlsen
Posts: 191
Joined: Thu Sep 29, 2011 7:40 am

Re: UVEX3 N2

Post by Terry Bohlsen »

Dubreuil Pierre wrote:Hello Terry and Robin

The guiding and calibration module is being tested on the sky.
see post http://www.spectro-aras.com/forum/viewt ... =45&t=2363

Sunday at the OHP Stephane UBAUD who made the first prototype will be present and will be able to present it to you.
A UVEX spectrograph (3) with this module will be available for testing.

good to you

Pierre
Pierre
This is very good. Unfortunately I am in Australia and can't attend but hopefully the files and instructions will be made available after then.
Cheers
Terry
Terry Bohlsen
Armidale NSW
Australia
Post Reply