Page 1 of 1
bug in Vspec slant tilt
Posted: Wed Dec 21, 2011 2:04 pm
by Robin Leadbeater
Hi Valerie,
I have just tried the new slant/tilt measurement and correction feature in Vspec but the correction seems to be working in the wrong direction (The slant/tilt is larger after the correction) I have attached the fits files I used to test it
Cheers
Robin
Re: bug in Vspec slant tilt
Posted: Mon Dec 26, 2011 10:28 am
by Valerie Desnoux
Hi Robin
Thanks for pointing to the issue. I'm going to publish a fix.
Sending the data was key, and easy to fix. It is always a pb when tests are done with always the same spectrograph, you have alwyas same slant or tilt direction to fix...
Valerie
Re: bug in Vspec slant tilt
Posted: Mon Dec 26, 2011 11:59 am
by Valerie Desnoux
V405 is supposed to fix the issue... hope my brain is still clear in this christmas time...
V.-
Re: bug in Vspec slant tilt
Posted: Wed Dec 28, 2011 5:55 pm
by Valerie Desnoux
Brain was not...I had to publish 406 - due to an improvement in the interface, the edition within the assistant of the files List_instru and List_obs was not possible (impossible to find the file was always displaeyd).
Shall be fixed by now.
Valerie