Page 2 of 2
Re: Linx, a Low-Resolution Spectrograph Project
Posted: Tue Mar 03, 2026 5:40 pm
by Joan Guarro Flo
Hello,
Finally, I can show you the LINX first light. I hope to show you more of them in a few weeks.
I hope you like it.
Regards. J.Guarro.
Re: Linx, a Low-Resolution Spectrograph Project
Posted: Fri Mar 13, 2026 11:13 am
by Joan Guarro Flo
Hello,
You can see some more LINX results here.
The next step is to try to know what the LINX edge is with a 16-inch SC telescope.
Regards, J.Guarro.
Re: Linx, a Low-Resolution Spectrograph Project
Posted: Wed Mar 18, 2026 1:36 pm
by Joan Guarro Flo
Hello,
You can see here two new results of the LINX Low-Relolution Spectroscope.
I hope you like it.
Cheers, J. Guarro.
Re: Linx, a Low-Resolution Spectrograph Project
Posted: Fri Mar 27, 2026 9:00 pm
by Joan Guarro Flo
Hello,
the Linx low-resolution spectrograph gives very good results, I want to show you this example.
Cheers, J.Guarro.
Re: Linx, a Low-Resolution Spectrograph Project
Posted: Fri Jul 24, 2026 3:34 am
by Kay Cross
Joan Guarro Flo wrote: Fri Mar 27, 2026 9:00 pm
Hello,
the Linx low-resolution spectrograph gives very good results, I want to show you this example.
Cheers, J.Guarro.
Hi, I’m interested in making one of these for myself. I’ve found a lot of the documentation for the NOU_T, which it looks like this shares components with. Are you willing to provide a component list, and the thing I’ve been having the hardest time finding, dimensions of the enclosure. Thanks!
Re: Linx, a Low-Resolution Spectrograph Project
Posted: Sat Jul 25, 2026 8:30 pm
by Francois Teyssier
Trial by Admin
Re: Linx, a Low-Resolution Spectrograph Project
Posted: Mon Jul 27, 2026 6:23 pm
by Joan Guarro Flo
Merci François ! The password problem has been resolved.
Hi Kay,
Do you have any previous experience making spectrographs? Of course, I could provide you with the list of the optical components for the Linx,
and then?
You need to make a 4mm diameter hole inclined 22º in the center of a flat mirror 25.4mm x 25.4mm x 6mm. Can you do it?
Could you be more specific, please?
Waiting for your answer.
Joan.