Bad efficiency of the eShel from shelyak

Design, construction, tuning of spectroscopes
Information and discussion about softwares (telescope remote, autoguiding, acquisition, spectral processing ...)

Bad efficiency of the eShel from shelyak

Postby Berthold Stober » Wed May 08, 2019 6:13 pm

Bonjour à tous

I have for some time ( perhaps the last 6 months) big problems with the efficiency of the shelyak eShel . I sent it to shelyak but no effect could realized. The bad efficiency is still to see. I have changed all fibers -> nothing. In 2015 I had with KAF 3200 after 10 seconds using the tungsten lamp oft the calibration unit about 50.000 ADU and now I have since about 6 months 50.000 too but I need now 25 seconds. I don't know what I could do to solve this problem.

The efficiency of an eShel is high depending of the correct amount of the angle alpha , 63 degree. How can I find out if this angle is correct on my eShel?

So how it is, I cannot use the expensive device.

Berthold Stober
Posts: 16
Joined: Thu Apr 21, 2016 8:15 pm

Re: Bad efficiency of the eShel from shelyak

Postby James Foster » Wed Jun 12, 2019 9:47 pm

To: Berthold,

I don't have an eShel, but have you gone through Shelyak manual and Christian's extensive notes on how to set-up the
instrument and process data using Isis? Here are some links:

Shelyak Manual:

Device use:

Isis data processing:

Remember, Spectroscopy is on the bleeding edge of what Amateur astronomers do and, as such, we must research techniques
and theory more than any other portion of amateur astronomy. The only harder pursuits in amateur astronomy maybe radio astronomy and/or
spectropolarimetry where you need both spectroscopic expertise and knowledge of magnetic-electrical fields to interrupt the data.


p.s. Once you get eShel running, remember that Shelyak has a modification for eShel that improves its near UV efficiency and increases the orders you
can get usable data from.
James Foster
Lhires III (2400/1800/600 ln/mm Grat) Spectroscope,
LISA IR/Visual Spectroscope (IR Configured Presently)
Alpy 600 with Guide/Calibration modules and Photometric slit
Star Analyzer 200
James Foster
Posts: 324
Joined: Sun Jan 24, 2016 7:14 am

Return to Spectroscopes and Softwares

Who is online

Users browsing this forum: Google [Bot] and 3 guests